Table of Contents
Advertisement
Show Commands
protocol protocol-name — Displays routes learned from the specified protocol.
summary — Displays a route table summary information.
tunnel-endpoints — Specifies to include tunnel endpoint information.
next-hop-type tunneled — Displays only the tunneled next-hops. For each route entry, the tunnel
Output
Standard Route Table Output — The following table describes the standard output fields for the
route table.
Dest Address
Next Hop
Type
Protocol
Age
Metric
Pref
No. of Routes
Sample Output
*A:Dut-C# show router route-table 1.1.1.1/32
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix
-------------------------------------------------------------------------------
1.1.1.1/32
-------------------------------------------------------------------------------
No. of Routes: 1
===============================================================================
A:ALA# show router route-table
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix
Age
Page 164
Values
local, sub-mgmt, managed, static, ospf, ospf3, isis, rip, aggregate, bgp, bgp-vpn
owner and tunnel ID is shown.
Label
The route destination address and mask.
The next hop IP address for the route destination.
Local — The route is a local route.
Remote — The route is a remote route.
The protocol through which the route was learned.
The route age in seconds for the route.
The route metric value for the route.
The route preference value for the route.
The number of routes displayed in the list.
Next Hop[Interface Name]
10.20.1.1 (tunneled:RSVP:1)
Pref
Description
Type
Proto
Remote
BGP
Type
Proto
7710 SR OS Router Configuration Guide
Age
Pref
Metric
00h00m09s
170
0
Advertisement
Table of Contents
