Alcatel 7710 SR OS Configuration Manual page 391

dst-port-number — The destination port number to be used as a match criteria expressed as a decimal
range start end — Specifies an inclusive range of port numbers to be used as a match criteria. The
fragment
Syntax fragment {true | false}
no fragment
Context config>filter>ip-filter>entry>match
Description Configures fragmented or non-fragmented IP packets as an IP filter match criterion. Note that an
entry containing L4 match criteria will not match non-initial (2nd, 3rd, etc) fragments of a fragmented
packet since only the first fragment contains the L4 information.
The no form of the command removes the match criterion.
Default
no fragment
Parameters true — Configures a match on all fragmented IP packets. A match will occur for all packets that have
false — Configures a match on all non-fragmented IP packets. Non-fragmented IP packets are
icmp-code
Syntax icmp-code icmp-code
no icmp-code
Context config>filter>ip-filter>entry>match
config>filter>ipv6-filter>entry>match
Description Configures matching on ICMP code field in the ICMP header of an IPor IPv6 packet as a filter match
criterion. Note that an entry containing L4 match criteria will not match non-initial (2nd, 3rd, etc)
fragments of a fragmented packet since only the first fragment contains the L4 information.
This option is only meaningful if the protocol match criteria specifies ICMP (1).
The no form of the command removes the criterion from the match entry.
Default
no icmp-code
Parameters icmp-code — The ICMP code values that must be present to match.
7710 SR OS Router Configuration Guide
integer.
Values
1 — 65535
destination port numbers start-port and end-port are expressed as decimal integers.
Values
1 — 65535
either the MF (more fragment) bit set OR have the Fragment Offset field of the IP header set to a
non-zero value.
packets that have the MF bit set to zero and have the Fragment Offset field also set to zero.
Values
0 — 255
Filter Policies
Page 391