Alcatel 7710 SR OS Configuration Manual page 92

Configuration Commands
prefix exists for 10.10.0.0/16, and a service prefix is configured as 10.10.10.0/24, then the 10.10.0.0/
16 entry is removed as long as no services are configured that use 10.10.x.x addresses other than
10.10.10.x.
The no form of the command removes all address reservations. A service prefix cannot be removed
while one or more service uses an address or addresses in the range.
Default
no service-prefix - no IP addresses are reserved for services.
Parameters ip-prefix/mask — The IP address prefix to include in the service prefix allocation in dotted decimal
sgt-qos
Syntax sgt-qos
Context config>router
Description This command configures DSCP/Dot1p re-marking for self-generated traffic.
application
Syntax application dscp-app-name dscp {dscp-value |dscp-name}
application dot1p-app-name dot1p dot1p-priority
no application {dscp-app-name|dot1p-app-name}
Context config>router>sgt-qos
Description This command configures DSCP/Dot1p re-marking for applications.
Parameters
dscp-app-name — Specifies the DSCP application name.
dscp-value — Specifies the DSCP value
Page 92
notation.
Values ipv4-prefix:
ipv4-prefix-length:
ipv6-prefix:
ipv6-prefix-length:
Values
exclusive
When this option is specified, the addresses configured are exclusively used for services and
cannot be assigned to network ports.
bgp, cflowd, dhcp, dns, ftp, icmp, igmp, ldp, mld, msdp, ndis, ntp, ospf, pim, radius, rip, rsvp,
snmp, snmp-notification, srrp, ssh, syslog, tacplus, telnet, tftp, traceroute, vrrp
Values
0 — 63
a.b.c.d (host bits must be 0)
0 — 32
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
0 — 128
7710 SR OS Router Configuration Guide