Table of Contents
Advertisement
An Example of a IPv6 Over IPv4 Tunnel Configuration
The IPv6 address is the next-hop as it is received through BGP. The IPv4 address is the system
address of the tunnel's endpoint static-route ::C8C8:C802/128 indirect 200.200.200.2
This configuration displays an example to configure a policy to export IPv6 routes into BGP.
CLI Syntax: config>router
The following displays an IPv6 over IPv4 tunnel configuration
A:ALA-49>configure>router# info
----------------------------------------------
...
----------------------------------------------
A:ALA-49>configure>router#
7710 SR OS Router Configuration Guide
bgp
export policy-name [policy-name...(upto 5 max)]
router-id ip-address
group name
family [ipv4] [vpn-ipv4] [ipv6] [mcast-ipv4]
type {internal|external}
neighbor ip-address
local-as as-number [private]
peer-as as-number
policy-options
policy-statement "ospf3"
description "Plcy Stmnt For 'From ospf3 To bgp'"
entry 10
description "Entry From Protocol ospf3 To bgp"
from
protocol ospf3
exit
to
protocol bgp
exit
action accept
exit
exit
exit
exit
IP Router Configuration
Page 57
Advertisement
Table of Contents
