Table of Contents
Advertisement
Show Commands
Egr. Matches: 62 pkts (3968 bytes)
Entry
Ing. Matches: 80 pkts (5440 bytes)
Egr. Matches: 80 pkts (5120 bytes)
redirect-policy
Syntax
redirect-policy {redirect-policy-name [dest ip-address] [association]}
Context
show>filter
Description
This command shows redirect filter information.
Parameters
redirect-policy-name — Displays information for the specified redirect policy.
dest ip-address — Directs the router to use a specified IP address for communication.
association — Appends association information.
Output
Redirect Policy Output — The following table describes the fields in the redirect policy
command output.
Page 438
: 10
Label
Redirect Policy
Applied
Description
Active Destina-
tion
Destination
Oper Priority
Admin Priority
Admin State
Oper State
Ping Test
Timeout
Specifies a specific redirect policy.
Specifies whether the redirect policy is applied to a filter policy entry.
Displays the user-provided description for this redirect policy.
Specifies the IP address of the active destination.
ip address —
Indicates that there is currently no active destination.
none —
Specifies the destination IP address.
Specifies the operational value of the priority for this destination. The
highest operational priority across multiple destinations is used as the
preferred destination.
Specifies the configured base priority for the destination.
Specifies the configured state of the destination.
Tests for this destination will not be conducted.
Out of Service —
Specifies the operational state of the destination.
Specifies the name of the ping test.
Specifies the amount of time in seconds that is allowed for receiving a
response from the far-end host. If a reply is not received within this
time the far-end host is considered unresponsive.
7710 SR OS Router Configuration Guide
FrameType
: Ethernet
Description
Advertisement
Table of Contents
