idp SMART-70 User Manual page 90

Figure 128
Card jam in Laminator 3
Figure 129
Card jam in Laminator 4
Figure 130
Card jam in Laminator 5
C. Card jam in the Laminator 3
If laminating film is stuck to card or coiled on
rollers as Figure, the film cartridge may not
be pulled out easily. In this case, please cut
the laminating film or slowly pull out the film
cartridge while pressing the "" or ""
button on the control panel of Laminator
little by little.
D. Card jam in Laminator 4
To remove a jammed card in laminator,
please press the "" button on the control
panel of Laminator until the jammed card is
completely ejected.
E. Card jam in Laminator 5
If laminating film is cut, please stick the cut
laminating film together by using a sticky
tape and then turn the dial on film cartridge
until unused laminating film is on take-up
core.
90