idp SMART-70 User Manual page 74

Error Card Out: To set the direction which error card (encoding failed card) is ejected.
SBS Only: This option is only activated when SDK is used to print card. Printer driver can't
be used when this option is set.
Use USB Serial: When SMART-70 Printer is connected to USB, Printer transmits the USB
serial number to PC. Default is the same number used by all SMART-70. To connect
multiple SMART-70 Printers to only one PC via USB, Please set this option to "USE" for
using unique serial numbers for each Printer.
UART Baud Rate: To set the communication speed (Baud rate) of the external device
connected to Printer by serial.
UART Bypass: When Printer is communicated with an external device by serial interface,
the commands are passed without any processing.
Cleaning Warning: After a certain number of printings, Printer is contaminated and
needed to clean for keeping the Printer in the best condition. If cleaning is required, please
set how to display the warning message.
Normal Ribbon Search: To set that SMART-70 can search the panel of ribbon more
accurately in ribbon searching.
Printer Master/Slave: SMART-70 Printer can variously be configured according to your
needs and two Printers can be connected and used. In this case, this option is used to set
the Printer connected to PC via USB to "MASTER" and set the other Printer to "SLAVE".
LCD Error Display: To set the displayed message type on the LCD of Printer when error
occurs in Printer.
74