idp SMART-70 User Manual page 62

using "CardPrinter70Setup" utility.
Main [-100:100]: To adjust the gamma values of all panels.
-
Yellow [-100:100]: To adjust the gamma value of the yellow panel.
-
Magenta [-100:100]: To adjust the gamma value of the magenta panel.
-
Cyan [-100:100]: To adjust the gamma value of the cyan panel.
-
Black [-100:100]: To adjust the gamma value of the resin black panel.
-
Overlay [-100:100]: To adjust the gamma value of the overlay panel.
-
 Position Processing: The printing position between panels can be adjusted. If the value is
higher, the positions are more accurate but the color sense may be a little lower.
Color [-32:32]: To adjust the printing position of the color panels (yellow, magenta and
-
cyan).
Mono [-32:32]: To adjust the printing position of the resin black panel.
-
Overlay [-32:32]: To adjust the printing position of the overlay panel.
-
 Resin Black (K) Processing: The method to extract the data to be printed by the resin black
is specified.
Text [0:100]: To set the density criteria for extracting the text to be printed by the resin
-
black.
Dot [0:100]: To set density criteria for extracting the pixels to be printed by the resin
-
black.
Threshold [0:100]: To set density criteria for printing by the resin black when the dithering
-
is performed by using the Threshold.
Dithering Degree [0:100]: To set sharpness when the dithering is performed by using the
-
Random.
Resin Extraction: Method to extract the data for the resin black.
-
> Black object: Text, line, etc. Black objects are extracted.
> Black Text: Text is only extracted.
> Black Dots: All black dots are extracted.
> Not Use: No extraction.
 Rewritable Controls: This property is only for rewritable printer.
62