Cable Connection Of Smart-70; Figure 57 Cable Connection Of Smart-70 Iphlo; Figure 58 Cable Connection Of Smart-70 Ipp - idp SMART-70 User Manual

2.2.3 Cable connection of SMART-70

RS485 is used for the inter-module communication of SMART-70 and SATA cable is used to
connect each module. Red SATA cables are used to connect each module when SMART-70
Printer is installed as Figure 57.
Figure 57
Cable connection of SMART-70 IPHLO
When two Printers are combined in a system of SMART-70, the USB Host port of the first
Printer should be connected to the USB Device port of the second Printer by using USB cable
as Figure 58. When the Printers are connected as above method, the command to control the
modules in the system is able to be transmitted via the red SATA cables and the printing data is
able to be transmitted via the USB cable. The USB or Ethernet port of the first Printer is only
able to be used for the communication with PC.
Second First
Printer Printer
Figure 58
Cable connection of SMART-70 IPP
When encoding option or/and scanner is installed into the Hybrid Flipper, the USB Host port of
Printer should be connected to the USB Device port of the Hybrid Flipper by using USB cable as
51