Figure 4 Front Side Of Printer; Figure 5 Rear Side Of Printer - idp SMART-70 User Manual

1
2 0
0
3
0
4
0
5
0
6
0
1
4
3 5
6 7
0
0 0
0 0
0
2
0
① Control panel LCD
② Control panel buttons
③ Physical lock
④ Ribbon cartridge lock lever
⑤ Ribbon cartridge
7
0
⑥ Indicator LED
⑦ Card gate
Figure 4
Front side of Printer
① Kensington lock
② Communication port
③ Serial communication port
④ Ethernet port
⑤ USB host communication port
⑥ USB device port
8
⑦ Power port
0
2
0
⑧ Power switch
Figure 5
Rear side of Printer
17
The status of Printer is displayed.
Buttons are used to adjust configuration and
check status.
Physical lock is to lock Printer and ribbon
cartridge.
To pull out ribbon cartridge, please turn lever
to the right 90 degrees for taking.
Color ribbon for 500 cards or mono ribbon for
3000 cards is loaded into ribbon cartridge.
The status of Printer is displayed by the color.
Card gate is to convey cards from module to
module.
Kensington lock is usable.
To communicate between SMART-70 modules,
please connect to an adjacent module.
This port is to communicate with external
device except SMART-70 modules.
This port is for network communication.
To communicate with PC, please connect to PC.
Please connect the 24V DC power adaptor
provided with Input Hopper.
Turn On/Off.