Table of Contents
Advertisement
Boot Recovery Mode
84
NE1072T Installation Guide
The Boot Recovery Mode allows you to recover from a failed software or boot image
upgrade using TFTP or XModem download.
To enter Boot Recovery Mode you must select the Startup in recovery mode
option from the Boot Management Menu.
Entering Rescue Mode.
Please select one of the following options:
T) Configure networking and tftp download an image
X) Use xmodem 1K to serial download an image
P) Physical presence (low security mode)
F) Filesystem check
R) Reboot
E) Exit
Option? :
The Boot Recovery Mode menu allows you to perform the following actions:
To recover from a failed software or boot image upgrade using TFTP, enter T and
follow the screen prompts. For more details, see
Upgrade using TFTP" on page
To recover from a failed software or boot image upgrade using XModem
download, enter X and follow the screen prompts. For more details, see
"Recovering from a Failed Image Upgrade using XModem Download" on
page
87.
To enable the loading of a special image, enter P and follow the screen prompts.
For more details, see
To check if the switch is ready to run Cloud NOS software, enter F. It performs a
check to see if the filesystem is optimally partitioned and updates it accordingly.
To restart the reload process from the beginning, enter R.
To exit Boot Recovery Mode menu, enter E.
85.
"Physical Presence" on page
"Recover from a Failed Image
89.
Advertisement
Table of Contents
