Omron NJ501 series Connection Manual page 25

7.3.2. Setting up the EtherCAT Network Configuration
Set up the EtherCAT network configuration.
1
Right-click Master on the
EtherCAT Tab Page of the Edit
Pane, and select Compare and
Merge with Actual Network
Configuration.
*If the EtherCAT Tab Page is not
displayed in the Edit Pane, take
step 9 in 7.3.1. Starting
Sysmac Studio and Installing
the ESI File to display.
A screen is displayed stating
"Get information is being
executed".
2
The Compare and Merge with
Actual Network Configuration
Dialog Box is displayed.
The node address 1 and
AX9000TS-U5 Rev:0x00000001
are added to the Actual network
configuration after the
comparison.
Click Apply actual network
configuration.
3
The dialog box on the right is
displayed. Check the contents
and click Apply.
The dialog box on the right is
displayed. Check the contents
and click Close.
7．EtherCAT Connection Procedure
22