Replacing The Lamp - Electrolux EOCP5803AX Manual

38 www.electrolux.com
7. Pull the door trim to the front to
remove it.
8. Hold the door glass panels on their
top edge one by one and pull them up
out of the guide.
9. Clean the glass panel with water and
soap. Dry the glass panel carefully.
When the cleaning is completed, do the
above steps in the opposite sequence.
Install the smaller panel first, then the
larger and the door.
WARNING!
Make sure that the glasses
are inserted in the correct
position otherwise the surface
of the door may overheat.
Make sure that you put the glass panels
(C, B and A) back in the correct sequence.
First, insert panel C, which has a square
printed on the left side and a triangle on
the right side. You will also find those
symbols embossed on the door frame.
The triangle symbol on the glass must
match the triangle on the door frame, and
the square symbol must match the
square. After that insert the other two
glass panels.
A B C

12.5 Replacing the lamp

Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The top lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300
°C heat-resistant lamp.
4. Install the glass cover.