Electrolux EOCP5803AX Manual page 18

18 www.electrolux.com
6. Put the tip of the spit into the turnspit
hole.
7. Lay the back side of the spit on the
turnspit frame.
Refer to "Product description"
chapter.
8. Remove the turnspit handle.
9. Select a function with the turnspit
position. The turnspit rotates.
10. Set the necessary temperature. Refer
to the cooking tables or the recipe
book.
The turnspit does not stop if
you open the oven door.
If a clock function (Duration or
End) ends and you do not
deactivate the appliance, the
turnspit continues to operate
for the next 10 minutes.
9.3 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire shelf
on the guide bars above and make sure
that the feet point down.
Small indentation at the top
increase safety. The
indentations are also anti-tip
devices. The high rim around
the shelf prevents cookware
from slipping of the shelf.
9.4 Telescopic runners -
inserting the accessories
With the telescopic runners you can put in
and remove the shelves more easily.
CAUTION!
Do not clean the telescopic
runners in the dishwasher. Do
not lubricate the telescopic
runners.
CAUTION!
Make sure you push back the
telescopic runners fully in the
appliance before you close
the oven door.
Wire shelf:
Put the wire shelf on the telescopic
runners so that the feet point downwards.
The high rim around the wire
shelf is a special device to
prevent the cookware from
slipping.