Replacing The Lamp; Troubleshooting; What To Do If - Electrolux EOC5400 User Manual

Table of Contents

Advertisement

Available languages

Available languages

on the screen-printing zones is not rough
when you touch it.
A
B
Make sure that you install the middle
panel of glass in the seats correctly.

11. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

11.1 What to do if...

Problem
You cannot activate or op‐
erate the oven.
The oven does not heat
up.
C
Possible cause
The oven is not connected
to an electrical supply or it
is connected incorrectly.
The oven is deactivated.

10.7 Replacing the lamp

Put a cloth on the bottom of the interior
of the appliance. It prevents damage to
the lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
CAUTION!
Always hold the halogen
lamp with a cloth to prevent
grease residue from burning
on the lamp.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The back lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300
°C heat-resistant lamp.
4. Install the glass cover.
Remedy
Check if the oven is cor‐
rectly connected to the
electrical supply (refer to
the connection diagram if
available).
Activate the oven.
ENGLISH
25

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Eoc3400

Table of Contents