Table of Contents
Advertisement
ANSI INSTALLATION STEPS
ANSI Mounting
Rods (screw-in)
3.2
ANSI Installation Steps
3–2
DIN
Mounting
Brackets
Figure 3-1: EPM 2200 Mounting Information
Recommended Tools for EPM 2200 Meter Installation:
•
#2 Phillips screwdriver, small wrench and wire cutters.
•
Mount the meter in a dry location free from dirt and corrosive substances. The meter
is designed to withstand harsh environmental conditions. (See Environmental
Specifications in 2.2 Specifications on page 2–4.)
1.
Insert 4 threaded rods by hand into the back of meter. Twist until secure.
2.
Slide ANSI 12 Mounting Gasket onto back of meter with rods in place.
3.
Slide meter into panel.
CHAPTER 3: MECHANICAL INSTALLATION
EPM 2200 POWER METER – INSTRUCTION MANUAL
Hide quick links:
Advertisement
Table of Contents
