Thermo Scientific Orion DUAL STAR User Manual page 76

Data Storage and Retrieval
b . To enable communication to a printer, press the ▲ / ▼ keys to highlight
Printer and press the f2 (select) key . Press the ▲ / ▼ keys to highlight
Printer On/Off and press the f2 (select) key . Press the ▲ / ▼ keys to
highlight On and press the f2 (accept) key . Press the ▲ / ▼ keys to
highlight Baud Rate and press the f2 (select) key . Press the ▲ / ▼ keys
to highlight 1200, 2400, 4800, 9600, 19200 or 38400 as the baud rate and press
the f2 (accept) key . Once the printer settings are entered, press the
f1 (back) key .
c . To disable communication to a computer, press the ▲ / ▼ keys to highlight
PC and press the f2 (select) key . Press the ▲ / ▼ keys to highlight PC
On/Off and press the f2 (select) key . Press the ▲ / ▼ keys to highlight Off
and press the f2 (accept) key . Press the f1 (back) key .
d . To disable communication to a printer, press the ▲ / ▼ keys to highlight
Printer and press the f2 (select) key . Press the ▲ / ▼ keys to highlight
Printer On/Off and press the f2 (select) key . Press the ▲ / ▼ keys to
highlight Off and press the f2 (accept) key . Press the f1 (back) key .
6 . Press the ▲ / ▼ keys to highlight Data Log and press the f2 (select) key .
Press the ▲ / ▼ keys to highlight Data Log On/Off and press the f2 (select)
key . Press the ▲ / ▼ keys to highlight On to enable the data log and press the
f2 (accept) key or press the ▲ / ▼ keys to highlight Off to disable the data
log and press the f2 (accept) key . Press the ▲ / ▼ keys to highlight Ring
Buffer and press the f2 (select) key . Press the ▲ / ▼ keys to highlight Off or
On and press the f2 (accept) key . If Off is selected, an error message will
be displayed when all 1000 data log points are filled and the data log must
be emptied to clear the error message . If On is selected, the oldest data
log point will be overwritten with the new data log point when all 1000 data
log points are filled . Once all of the data log settings are entered, press the
f1 (back) key .
7 . Once all of the exporting settings are entered, press the f1 (back) key until
the meter returns to the measurement mode .
0
Thermo Scientific Orion DUAL STAR pH/ISE Meter User Guide
™