Thermo Scientific Orion DUAL STAR User Manual page 19

Display con Description
25.0
ready
ready
ready
ppm
ppm
25.0
25.0
25.0
cal
ATC2
ATC2
cal 05/25/2009
ATC2
ppm
ppm
0.0
0.0
Ch. setup
Ch.2
ppm
F -
s/n:ABCDE1234
0.0
15:45
s/n:ABCDE1234
15:45
05/25/2009
05/25/2009
25.0
Ch. setup 1.00
15:45
Ch. setup
ATC2
ready
05/25/2009
ID
25.0
12345ABCD
ppm
Ch. setup
0.0
ATC2
sample id
15:45
ppm
Ch.2
cal
05/25/2009
F -
s/n:ABCDE1234
0.0
Ch. setup
15:45
05/25/2009
Ch. setup
ID
12345ABCD
sample id
Thermo Scientific Orion DUAL STAR
25.0
Auto-Read (AR) Read Type Indicator – If Auto-Read was selected as the read
type, the AR icon will appear when the reading is stable and the display has
25.0
ATC2
been locked. To change the read type, refer to the Setup Menu section.
Stabilizing/Ready Read Type Indicator – Specifies the measurement stability of ATC2
ATC2
the electrode. To change the read type, refer to the Setup Menu section.
ppm
Measurement Mode – Indicates the unit of measurement for the measurement
0.0
value and determines the type of calibration that will be performed. To
0.0
change the measurement mode, refer to the Setup Menu section. If the ISE
measurement mode is changed, the electrode must be re-calibrated with new
0.0
standards that have the same measurement unit as the measurement mode.
15:45
15:45
05/25/2009 Temperature Measurement – Displays the current temperature based on the
05/25/2009
selected ATC probe reading or entered temperature value. To change the
15:45
Ch. setup temperature display to Celsius or Fahrenheit, refer to the Setup Menu section.
Temperature Source – Shows the origin of the current temperature
Ch. setup
measurement. To change the source, refer to the Setup Menu section.
mV Measurement – Shows the raw millivolt reading of the electrode.
Printer Interface – Indicates if a printer is interfaced with the meter.
25.0
ready
1.00
Computer Interface – Indicates if a computer is interfaced with the meter. USB
ATC2
will be shown when the meter is connected to a computer via the USB input.
ready
Timed Interval Read Type Indicator – Indicates when a timed reading is being
ppm
taken by the meter. To change the read type, refer to the Setup Menu section.
0.0
Autosampler Interface – Indicates if the meter is running the autosampler.
15:45
f1 Function – Displays the action that will be done when the f key is pressed.
cal
05/25/2009
f2 Function – Displays the action that will be done when the f key is pressed.
Ch. setup
f3 Function – Displays the action that will be done when the f key is pressed.
ready
1.00
Time and Date – Displays the current time and date settings. To change the
time and date, refer to the Setup Menu section.
Sample ID – Shows the operator assigned sample ID number. To change the
sample ID number, refer to the Setup Menu section.
cal
25.0
ATC2
ppm
0.0
15:45
05/25/2009
Ch. setup
25.0
ATC2
ppm
0.0
15:45
05/25/2009
Ch. setup
pH/ISE Meter User Guide
™
Meter Overview