Thermo Scientific Orion DUAL STAR User Manual page 36

Meter Setup
Log View – continued
Calibration Log – Press the ▲ / ▼ keys to highlight Calibration Log and
•
press the f2 (accept) key . Press the ▲ / ▼ keys to highlight Channel 1 Cal
or Channel 2 Cal and press the f2 (select) key . Press the ▲ / ▼ keys to
highlight pH, ISE, RmV, ORP or Temperature as the calibration type and press
the f2 (select) key . The meter will display a list of calibrations for the
selected channel and calibration type . The list shows the sequential number
of the calibration (Cal_101), the date that the point was saved (07/05/2008) and
the time that the point was saved (12:05) . To view the calibration data, press
the ▲ / ▼ keys to highlight the calibration point and press the f2 (select)
key . Press the f2 (print) key to print the calibration point, press the
f3 (graph) key to view the calibration graph or press the f1 (back) key to
return to the list of calibration points .
Press the f1 (back) key to return to the log view settings .
•
Once all of the log view settings are entered, press the f1 (back) key .
•
Note: When a data point is exported to a computer or printer, the time stamp
will include the hour, minutes and seconds.
Display
Press the ▲ / ▼ keys to highlight Display and press the f2 (select) key . View
and change the Display View, Backlight and Contrast settings, if required .
• Display View – Press the ▲ / ▼ keys to highlight Display View and press the
f2 (select) key . Press the ▲ / ▼ keys to highlight Channel 1, Channel 2 or
Channel 1 & 2 and press the f2 (accept) key .
Backlight – Press the ▲ / ▼ keys to highlight Backlight and press the
•
f2 (select) key . Press the ▲ / ▼ keys to set the backlight to Off, 1 (lowest
setting), 2, 3, 4 or 5 (highest setting) and press the f2 (accept) key .
Contrast – Press the ▲ / ▼ keys to highlight Contrast and press the
•
f2 (select) key . Press the ▲ / ▼ keys to set the contrast to 1 (least
contrast), 2, 3, 4 or 5 (most contrast) and press the f2 (accept) key .
• Once all of the display settings are entered, press the f1 (back) key .
0
Thermo Scientific Orion DUAL STAR pH/ISE Meter User Guide
™