Thermo Scientific Orion DUAL STAR User Manual page 34

Meter Setup
Export Data (PC/Printer/Log) – continued
Baud Rate – Press the ▲ / ▼ keys to highlight Baud Rate and press the
•
f2 (select) key . Press the ▲ / ▼ keys to highlight a baud rate of 1200,
2400, 4800, 9600, 19200 or 38400 and press the f2 (accept) key .
Once all of the PC settings are entered, press the f1 (back) key .
•
Printer – Press the ▲ / ▼ keys to highlight Printer and press the f2 (select)
•
key . View and change the printer settings, if required .
Printer On/Off – Press the ▲ / ▼ keys to highlight Printer On/Off and
•
press the f2 (select) key . To enable communication to a printer, press
the ▲ / ▼ keys to highlight On and press the f2 (accept) key . To disable
communication to a printer, press the ▲ / ▼ keys to highlight Off and
press the f2 (accept) key .
Baud Rate – Press the ▲ / ▼ keys to highlight Baud Rate and press the
•
f2 (select) key . Press the ▲ / ▼ keys to highlight a baud rate of 1200,
2400, 4800, 9600, 19200 or 38400 and press the f2 (accept) key .
• Once all of the printer settings are entered, press the f1 (back) key .
Data Log – Press the ▲ / ▼ keys to highlight Data Log and press the
•
f2 (select) key . View and change the data log settings, if required .
Data Log On/Off – Press the ▲ / ▼ keys to highlight Data Log On/Off and
•
press the f2 (select) key . To enable the data log, press the ▲ / ▼ keys
to highlight On and press the f2 (accept) key . To disable the data log,
press the ▲ / ▼ keys to highlight Off and press the f2 (accept) key .
Ring Buffer – Press the ▲ / ▼ keys to highlight Ring Buffer and press
•
the f2 (select) key . Press the ▲ / ▼ keys to highlight Off or On and
press the f2 (accept) key . If Off is selected, an error message will
be displayed when all 1000 data log points are filled and the data log
must be emptied to clear the error message . If On is selected, the
oldest data log point will be overwritten with the new data log point
when all 1000 data log points are filled .
• Once all of the data log settings are entered, press the f1 (back) key .
Once all of the exporting settings are entered, press the f1 (back) key .
•

Thermo Scientific Orion DUAL STAR pH/ISE Meter User Guide
™