GE D30 Instruction Manual page 411

8 SECURITY
3. Modify the user access rights by checking or clearing one or more of the fields shown.
The access rights are described in the following table
Table 8–2: ACCESS RIGHTS SUMMARY
FIELD DESCRIPTION
Delete Entry Checking this box will delete the user when exiting the user management configuration window.
Actual Values Checking this box allows the user to read actual values.
Settings Checking this box allows the user to read setting values.
Commands Checking this box allows the user to execute commands.
Event Recorder Checking this box allows the user to use the digital fault recorder.
FlexLogic Checking this box allows the user to read FlexLogic™ values.
Update Info Checking this box allows the user to write to any function to which they have read privileges. When any of
the Settings, Event Recorder, and FlexLogic boxes are checked by themselves, the user is granted read
access. When any of these are checked in conjunction with the Update Info box, they are granted read and
write access. The user will not be granted write access to functions that are not checked, even if the Update
Info field is checked.
Admin When this box is checked, the user will become an EnerVista URPlus Setup administrator, therefore
receiving all of the administrative rights. Exercise caution when granting administrator rights.
4. Click OK to save the changes to user to the security management system.
GE Multilin
8.3 ENERVISTA SECURITY MANAGEMENT SYSTEM
D30 Line Distance Protection System
8
8-17