GE D30 Instruction Manual page 401

8 SECURITY
By default, all settings are specified as locked and dis-
played against a grey background. The icon on the
upper right of the settings window will also indicate
Figure 8–2: SETTINGS TEMPLATE VIEW, ALL SET-
TINGS SPECIFIED AS LOCKED
5. Specify which settings to make viewable by clicking on
them.
Figure 8–3: SETTINGS TEMPLATE VIEW, TWO SET-
TINGS SPECIFIED AS EDITABLE
6. Click on Save to save changes to the settings tem-
plate.
c) ADDING PASSWORD PROTECTION TO A TEMPLATE
It is highly recommended that templates be saved with
password protection to maximize security.
The following procedure describes how to add password
protection to a settings file template.
GE Multilin
that EnerVista UR Setup is in EDIT mode. The follow-
ing example shows the phase time overcurrent set-
tings window in edit mode.
The setting available to view will be displayed against
a yellow background as shown below.
7. Proceed through the settings tree to specify all view-
able settings.
1. Select a settings file from the offline window on the left
of the EnerVista UR Setup main screen.
2. Selecting the Template Mode > Password Protect
Template option.
D30 Line Distance Protection System
8.2 SETTINGS SECURITY
8-7
8