GE D30 Instruction Manual page 100
Line distance protection system
Hide thumbs
Also See for D30:
- Instruction manual (686 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (486 pages)
Table of Contents
Advertisement
3.4 MANAGED ETHERNET SWITCH MODULES
The following popup screen will appear warning that the settings will be lost when the firmware is upgraded.
It is highly recommended that you save the switch settings before upgrading the firmware.
NOTE
3.
After saving the settings file, proceed with the firmware upload by selecting Yes to the above warning.
3
Another window will open, asking you to point to the location of the firmware file to be uploaded.
4.
Select the firmware file to be loaded on to the Switch, and select the Open option.
The following window will pop up, indicating that the firmware file transfer is in progress.
If the firmware load was successful, the following window will appear:
Note
3-48
D30 Line Distance Protection System
3 HARDWARE
GE Multilin
Advertisement
Table of Contents
