Advanced Stack-Port Diagnostics - NETGEAR S3300 User Manual

Table 28. Stack-port Configuration (continued)
Field
Link Speed (Gbps)
Transmit Data Rate (Mbps)
Transmit Error Rate (Error/s)
Total Transmit Errors
Receive Data Rate (Mbps)
Receive Error Rate (Error/s)
Total Receive Errors
Link Flaps

Advanced Stack-Port Diagnostics


To display Stack-port diagnostics:
Use the Stack-port Diagnostics page to display the diagnostics for all the stack-ports in the
given stack.
1. Click System > Stacking > Advanced > Stack-port Diagnostics.
2. Select either the Unit ID or All.
• Select the Unit ID field to display information for the selected unit.
• Select All to display information for all units.
Figure 49. Stack-port Diagnostics
S3300 Smart Managed Pro Switch
Description
Displays the maximum speed of the stack port.
Displays the approximate transmit rate on the stack port.
Displays the number of errors in transmit packets per second.
Displays the total number of errors in transmit packets since
bootup. The counter may wrap.
Displays the approximate receive rate on the stack port.
Displays the number of errors in receive packets per second.
Displays the total number of errors in receive packets since
bootup. The counter may wrap.
Displays a stack port counter that increments whenever a stack
port link transitions to the down state.
Configure System Information
86