Temperature Sensors - NETGEAR S3300 User Manual

2. Define the following fields:
• System Name. Enter the name you want to use to identify this switch. You can use up
to 255 alphanumeric characters. The factory default is blank.
• System Location. Enter the location of this switch. You can use up to 255
alphanumeric characters. The factory default is blank.
• System Contact. Enter the contact person for this switch. You can use up to 255
alphanumeric characters. The factory default is blank.
3. Click the Apply button.
The system parameters are applied, and the device is updated.
The following table describes the status information the System Information screen displays.
Table 4. System Information Screen Status Fields
Field
Product Name
Serial Number
System Object OID
Date & Time
System Up Time
Base MAC Address
Temp (C)
Temperature Traps Range
Note: NSDP supports TLV for Serial Number.
TLV
Serial Number

Temperature Sensors

This screen shows the temperature of different system sensors. The temperature is instant
and can be refreshed when you press the Update button.
S3300 Smart Managed Pro Switch
Description
The product name that describes the switch.
The serial number of the switch.
The base object ID for the switch's enterprise MIB.
The current date and time.
The number of days, hours, and minutes since the last system
restart.
The universally assigned network address.
The general temperature of the switch in degrees Celsius.
Identifies the minimum and maximum degrees of the temperature
traps range.
Value
1...21
Configure System Information
40
Description
For Smart Switch:
1 Byte:
0-Invalid
1-Valid
Next 20 bytes: Serial number string