NETGEAR S3300 User Manual page 183

The following table describes the MLD snooping querier status information on the screen.
Table 64.
Field
Operational State
Operational Version
Last Querier Address
Last Querier Version
Operational Max Response
Time

To remove an MLD snooping querier configuration:
1. Select the check box next to each entry to remove.
2. Click the Delete button.
S3300 Smart Managed Pro Switch
Description
Specifies the operational state of the IGMP snooping querier on a VLAN:
• Querier. The snooping switch is the querier in the VLAN. The snooping
switch will send out periodic queries with a time interval equal to the
configured querier query interval. If the snooping switch sees a better
querier (numerically lower) in the VLAN, it moves to non-querier mode.
• Non-Querier. The snooping switch is in non-querier mode in the VLAN. If the
querier expiry interval timer expires, the snooping switch moves into querier
mode.
• Disabled. The snooping Querier is not operational on the VLAN. The
Snooping Querier moves to disabled mode when MLD Snooping is not
operational on the VLAN or when the querier address is not configured or
the network management address is also not configured.
The MLD protocol version of the operational querier.
The IP address of the last querier from which a query was snooped on the VLAN.
The MLD protocol version of the last querier from which a query was snooped on
the VLAN.
The maximum response time to be used in the queries that are sent by the
snooping querier.
Configuring Switching
183