NETGEAR S3300 User Manual page 27

Power/Status LED
The Power LED is a bicolor LED that serves as an indicator of power and diagnostic status.
The following indications are given by the following LED states:
• A solid green LED indicates that the power is supplied to the switch and operating
normally.
• A solid yellow LED indicates that system is in the boot-up stage.
• No lit LED indicates that power is disconnected.
FAN Status LED
FAN status is indicated as follows:
• A solid yellow LED indicates that the fan is faulty.
• No lit LED indicates that the fan is operating normally.
Stack ID LED
The seven Segment LED displays the unit number in green. The dot LED on the bottom right
glows when either the unit is a Stack Manager or Standalone (meaning that it is not
connected in a Stack).
PoE Max LED
The PoE Max LED is for the S3300-28X-PoE+ and S3300-52X-PoE+ devices.
• Off indicates the system has more than 7 watts (W) of PoE power available for another
PD device.
• A steady yellow LED indicates that less than 7W of PoE power is available.
• A blinking yellow LED indicates the device was active in the past two minutes.
Help Access
Every screen contains a button to launch online help
assist in configuring and managing the switch. The online help screens are context-sensitive.
For example, if the IP Addressing screen is open, the help topic for that screen displays if you
click Help. Figure 7, Smart Switch Web Interface
link on the web interface.
User-Defined Fields
User-defined fields can contain 1 to 159 characters, unless otherwise noted in the field label
on the configuration screen. All alphanumeric and special characters can be used except for
the following (unless specifically noted for that feature):
S3300 Smart Managed Pro Switch
on page 22 shows the location of the Help
Getting Started
27
, which contains information to