NETGEAR S350 Series Hardware Installation Manual
8-port gigabit ethernet smart managed pro switch
Hide thumbs
Also See for S350 Series:
- User manual (365 pages) ,
- Product setup sheet (4 pages) ,
- Installation manual (2 pages)
Related Manuals for NETGEAR S350 Series
Summary of Contents for NETGEAR S350 Series
- Page 1 Hardware Installation Guide S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models • GS308T • GS310TP NETGEAR, Inc. November 2018 350 E. Plumeria Drive 202-11891-01 San Jose, CA 95134, USA...
- Page 2 Do not use this device outdoors. If you connect cables or devices that are outdoors to this device, see http://kb.netgear.com/000057103 for safety and warranty information. Trademarks © NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only. Revision History...
-
Page 3: Table Of Contents
Contents Chapter 1 Introduction Overview....................6 Features....................7 Safety Instructions and Warnings............8 Chapter 2 Hardware Overview Hardware overview of model GS308T..........12 Model GS308T: Front panel with ports and LEDs.....12 Model GS308T: Back panel............12 Model GS308T: LEDs..............13 Hardware overview of model GS310TP...........13 Model GS310TP: Front panel with ports and LEDs....13 Model GS310TP: Back panel............14 Model GS310TP: LEDs..............14 Model GS310TP: SFP ports for fiber connectivity......15... - Page 4 S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Chapter 5 Troubleshooting Troubleshooting chart...............28 PoE troubleshooting suggestions (model GS310TP)....29 Additional troubleshooting suggestions.........29...
-
Page 5: Chapter 1 Introduction
• S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch (GS308T) This model provides eight Gigabit RJ-45 copper ports. • S350 Series 8-Port Gigabit PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports (GS310TP) This model provides eight Gigabit PoE+ RJ-45 copper ports and two dedicated SFP fiber ports. -
Page 6: Overview
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Overview The switch provides eight 10/100/1000BASE-T RJ-45 copper ports that support nonstop 10/100/1000M Layer 2 networks. For model GS310TP, all RJ-45 ports support PoE+. Also for model GS310TP, two additional ports can accept small form-factor pluggable (SFP) gigabit interface converters (GBICs) for 1G fiber connectivity. -
Page 7: Features
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Features The switch supports the following key hardware features: • 8 Gigabit Ethernet ports. • 2 dedicated SFP fiber ports (model GS310TP). • PoE support (model GS310TP): 8 PoE+ (802.3at) ports Total PoE power budget of 55W for the switch •... -
Page 8: Safety Instructions And Warnings
Any device that is located outdoors and connected to this product must be properly grounded and surge protected. Failure to follow these guidelines can result in damage to your NETGEAR product, which might not be covered by NETGEAR’s warranty, to the extent permissible by applicable law. - Page 9 • Depending on your device, use only a supplied power adapter or approved power cable: If your device uses a power adapter: If you were not provided with a power adapter, contact your local NETGEAR reseller. Introduction Hardware Installation Guide...
- Page 10 S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch The power adapter must be rated for the product and for the voltage and current marked on the product electrical ratings label. If your device uses a power cable: If you were not provided with a power cable for your system or for any AC-powered option intended for your system, purchase a power cable approved for your country.
-
Page 11: Chapter 2 Hardware Overview
Hardware Overview This chapter describes the switch hardware features. The chapter includes the following sections: • Hardware overview of model GS308T • Hardware overview of model GS310TP • RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity • Reset button... -
Page 12: Hardware Overview Of Model Gs308T
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Hardware overview of model GS308T Model GS308T provides eight 10/100/1000BASE-T RJ-45 ports. Model GS308T: Front panel with ports and LEDs The following figure shows the front panel of model GS308T. Figure 1. Model GS308T front panel From left to right, the front panel of model GS308T provides the following components: •... -
Page 13: Model Gs308T: Leds
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Model GS308T: LEDs This section describes the LED designations of model GS308T. Table 1. Model GS308T LEDs on the front panel Description Power LED Solid green. The switch is powered on and operating normally. -
Page 14: Model Gs310Tp: Back Panel
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch • Eight independent 10/100/1000BASE-T RJ-45 PoE+ ports (1–8, see RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity on page 16), each with a left LED that functions as the combined link, speed, and activity LED and a right LED that indicates the PoE status (see Model GS310TP: LEDs on page 14). -
Page 15: Model Gs310Tp: Sfp Ports For Fiber Connectivity
(SFP) gigabit interface converters (GBICs, also referred to as transceiver modules). GBICs are sold separately from the switch. Model GS310TP supports the NETGEAR SFP transceiver modules that are listed in the following table. Table 3. Supported SFP transceiver modules... -
Page 16: Ports For 10/100/1000M Base-T Ethernet Connectivity
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity All RJ-45 copper ports support autosensing. When you insert a cable into an RJ-45 port, the switch automatically ascertains the maximum speed (10 Mbps, 100 Mbps, or 1 Gbps) and duplex mode (half-duplex or full-duplex) of the attached device. - Page 17 S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch • Return the switch to its factory default settings. Press the Reset button for at least five seconds. The switch restarts and returns to its factory default settings. During this process, the Power LED lights yellow.
-
Page 18: Chapter 3 Applications
Applications The switch is designed to provide flexibility in configuring network connections. The switch can be used as your only network traffic–distribution device for PoE and non-PoE devices or with 10 Mbps, 100 Mbps, and 1 Gbps Ethernet and fiber hubs, routers, access point, and other switches. -
Page 19: Desktop Switching
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Desktop switching You can use either model GS308T or model GS310TP as a desktop switch to build a small network that provides up to 1 Gbps access to desktop computers, non-PoE surveillance cameras, a NAS, servers such as a file server, an IPTV, and so on. -
Page 20: Poe And Desktop Switching (Model Gs310Tp)
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch If the power requirements for attached devices exceed the total power budget of the switch, the PoE power to the device on the highest-numbered active PoE+ port is disabled to make sure that the devices connected to the higher-priority, lower-numbered PoE+ ports are supported first. -
Page 21: Chapter 4 Installation
Installation This chapter describes the installation procedures for the switch. Switch installation involves the steps described in the following sections: • Step 1: Prepare the site • Step 2: Protect against electrostatic discharge • Step 3: Unpack the switch • Step 4: Install the switch on a flat surface •... -
Page 22: Step 1: Prepare The Site
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Step 1: Prepare the site Before you install the switch, make sure that the operating environment meets the site requirements that are listed in the following table. Table 4. Site requirements... -
Page 23: Step 3: Unpack The Switch
Installation guide • Model GS310TP: Switch model GS310TP DC power adapter with a detachable power cable (varies by region) Installation guide 5. If any item is missing or damaged, contact your local NETGEAR reseller for replacement. Installation Hardware Installation Guide... -
Page 24: Step 4: Install The Switch On A Flat Surface
SFP ports of model GS310TP. For information about SFP transceiver modules, see Model GS310TP: SFP ports for fiber connectivity on page 15. Note: Contact your NETGEAR sales office to purchase these modules. If you do not want to install an SFP module, skip this procedure. -
Page 25: Step 7: Check The Installation
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Step 7: Check the installation Before you apply power to the switch, perform the following steps. To check the installation: 1. Inspect the equipment thoroughly. 2. Verify that all cables are installed correctly. -
Page 26: Step 9: Manage The Switch
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Step 9: Manage the switch The switch contains built-in web browser–accessible software for viewing, changing, and monitoring the way it functions. This management software is not required for the switch to work. You can use the ports without using the management software. However,... - Page 27 Troubleshooting This chapter provides information about troubleshooting the switch. The chapter includes the following sections: • Troubleshooting chart • PoE troubleshooting suggestions (model GS310TP) • Additional troubleshooting suggestions...
- Page 28 S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Troubleshooting chart The following table lists symptoms, possible causes, and possible solutions for problems that might occur. Table 5. Troubleshooting chart Symptom Possible Cause Possible Solution Power LED is off. Power is not supplied to the switch.
- Page 29 S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch PoE troubleshooting suggestions (model GS310TP) Here are some tips for correcting PoE problems that might occur on model GS310TP: • Make sure that the PoE Max LED is off. If the PoE Max LED is solid yellow, disconnect one or more PoE devices to prevent PoE oversubscription.
- Page 30 • Switch integrity. If necessary, verify the integrity of the switch by resetting it. To reset the switch, disconnect the DC power from the switch and then reconnect the DC power. If the problem continues, contact NETGEAR technical support. For more information, visit the support website at netgear.com/support/.