NETGEAR S3300 User Manual page 141

across the units. In such a scenario, when this feature is enabled, any known unicast
traffic sent to the LAG uses only the LAG interface on the local unit. This ensures that
the known unicast traffic, destined to the LAG, does not cross the external stack link
when the LAG has a member or members on the local unit. Local preference does not
impact behavior with respect to unknown unicast, broadcast and multicast traffic.
4. Click the Apply button to send the updated configuration to the switch. Configuration
changes take effect immediately.
The following table shows the non-configurable information on the screen.
Table 48. Basic LAG Configuration
Field
LAG ID
Active Ports
LAG State
S3300 Smart Managed Pro Switch
Description
The number assigned to the LAG. This field is read-only.
A listing of the ports that are actively participating members of this port
channel. A maximum of 8 ports can be assigned to a port channel.
Indicates whether the link is Up or Down.
Configuring Switching
141