NETGEAR S3300 User Manual page 218

The Route Status table provides information about the static routes configured on the switch
and the dynamic routes the switch has learned.
Table 81. Routing table information
Field
Route Type
Network Address
Subnet Mask
Protocol
Route Type
Next Hop Interface
Next Hop IP Address
Preference
Metric

To delete one or more static routes:
1. Select the check box next to each route to remove.
2. Click the Delete button.
S3300 Smart Managed Pro Switch
Description
Indicates whether the learned route is a static or default route.
The IP route prefix for the destination.
Also referred to as the subnet/network mask, this indicates the portion of the IP
interface address that identifies the attached network.
This field tells which protocol created the specified route. The possibilities are
one of the following:
• Local
• Static
This field can be Connected or Static or Dynamic based on the protocol.
The outgoing router interface to use when forwarding traffic to the destination.
The outgoing router IP address to use when forwarding traffic to the next router
(if any) in the path towards the destination. The next router is always one of the
adjacent neighbors or the IP address of the local interface for a directly attached
network.
The preference is an integer value from 1 to 255. You can specify the preference
value of an individual static route.
Administrative cost of the path to the destination.
Configuring Routing
218