Table of Contents
Advertisement
Stack Sample Mode
To configure the stack sampling parameters:
1.
Select the Stack Sample Mode. The global status management mode which can be:
•
Cumulative. This tracks the sum of received time stamp offsets cumulatively.
•
History. This tracks the history of received timestamps.
The factory default is Cumulative.
2.
Enter a value for Max Samples – the maximum number of samples to keep. The valid
range is 100 to 500. Max Samples applies to History mode.
Figure 46. Configure Stack Sample Mode
3.
Click the Apply button to send the updated configuration to the switch. The status
management mode and sample size parameters are applied globally to all units in the stack.
Configuration changes take effect immediately.
4.
Click the Cancel button to cancel the configuration on the screen and reset the data on the
screen to the latest value of the switch.
Stack Configuration
To configure the stack:
1.
Select the Unit ID from the displayed list of units in the stack.
2.
Use the Change Switch ID to field to renumber the switch ID of the selected switch.
3.
Specify the Switch Type - the type of switch hardware when creating a new switch in the
stack.
4.
Specify the Switch Priority - the priority of a switch to become the primary management
unit. The range for priority is 0 to 15. The factory default is unassigned. The switch with the
S3300 Smart Managed Pro Switch
Configure System Information
81
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
