NETGEAR S3300 User Manual page 312

- Interface. The probe packet is sent from a specified interface. If you select this
option, the Interface field appears. Use the menu to select the interface from
which to send the probe packet.
Note: Values configured in the fields above are not saved to the switch. As a
result, refreshing the page sets these fields to the default values.
10. Click Apply to send a traceroute request to the specified IPv6 address or hostname. The
results are displayed below the configurable data in the TraceRoute Results area.
11. Click Cancel to cancel the operation on the screen and reset the data on the screen to the
latest value of the switch.
S3300 Smart Managed Pro Switch
Maintenance
312