NETGEAR S3300 User Manual page 62

Configure Auto-DoS
The Auto-DoS Configuration screen lets you automatically enable all the DoS features
available on the switch, except for the L4 Port attack. For information about the types of DoS
attacks the switch can monitor and block, see

To enable the Auto-DoS feature:
1. Select System > Management > Denial of Service > Auto-DoS Configuration.
Figure 36. Auto-DoS Configuration
2. Next to Auto-DoS Mode, select Enable.
When an attack is detected, a warning message is logged to the buffered log and is sent
to the syslog server. At the same time, the port is shut down and can be enabled only
manually by the admin user.
3. Click the Apply button.
Configure Denial of Service
The Denial of Service Configuration screen allows you to select which types of DoS attacks
the switch monitors and blocks.

To configure individual DoS settings:
1. Select System > Management > Denial of Service > Denial of Service Configuration.
S3300 Smart Managed Pro Switch
Configure Denial of Service
Configure System Information
62
on page 62.