NETGEAR S3300 User Manual page 33

4. Configure the desired settings.
5. Click the Apply button.
The settings you configure in the heading row are applied to the selected interface.

To configure a single LAG by using the Go To Interface field:
1. Click the LAGS link or the All link to display the LAGs.
2. In the Go To Interface field, type the LAG number, for example l3.
3. Click the Go button.
The check box associated with the interface is selected, the row for the selected interface
is highlighted, and the interface number appears in the heading row.
4. Configure the desired settings.
5. Click the Apply button.
The settings you configure in the heading row are applied to the selected interface.

To configure a single port:
1. Ensure that the screen is displaying all ports, and not only the LAGs.
2. Select the check box next to the port number.
The row for the selected interface is highlighted, and the interface number appears in the
heading row.
3. Configure the desired settings.
4. Click the Apply button.
The settings you configure in the heading row are applied to the selected interface.

To configure a single LAG:
1. Click the LAGS link or the All link to display the LAGs.
2. Select the check box next to the LAG number.
The row for the selected interface is highlighted, and the interface number appears in the
heading row.
3. Configure the desired settings.
4. Click the Apply button.
The settings you configure in the heading row are applied to the selected interface.

To configure multiple ports:
1. Ensure that the screen is displaying all ports, and not only the LAGs.
2. Select the check box next to each port to configure.
The row for each selected interface is highlighted.
S3300 Smart Managed Pro Switch
Getting Started
33