Disposal; Firmware History; Contact Addresses At Endress+Hauser; Technical Data - Endress+Hauser Liquicap M FTI51 Operating Instructions Manual

Liquicap M FTI51, FTI52
Endress+Hauser
9.4

Disposal

At disposal, ensure that materials are properly separated and the device components are
reused.
9.5

Firmware history

Electronics Release date
FEI51 10/2007
FEI52 07/2006
FEI53 07/2006
FEI54 07/2006
FEI55 11/2008
FEI57s 07/2006
FEI58 01/2010
9.6

Contact addresses at Endress+Hauser

On the back page of these Operating Instructions, you can find an internet address for
Endress+Hauser. The web site provides contact addresses that you can use in case of any
questions.
10

Technical data

10.1

Capacitance values of the probe

Basic capacitance: approx. 18 pF
Additional capacitance
Mount the probe at a minimum distance of 50 mm from a conductive container wall:
• Probe rod: approx. 1.3 pF/100 mm in air
• Probe rope: approx. 1.0 pF/100 mm in air
Fully insulated probe rod in water:
• Approx. 38 pF/100 mm (16 mm rod)
• Approx. 74 pF/100 mm (14 mm rod)
• Approx. 45 pF/100 mm (10 mm rod)
• Approx. 50 pF/100 mm (22 mm rod)
Insulated probe rope in water: approx. 19 pF/100 mm
Rod probe with ground tube:
• Insulated probe rod: approx. 6.4 pF/100 mm in air
• Insulated probe rod: approx. 38 pF/100 mm in water (16 mm rod)
• Insulated probe rod: approx. 45 pF/100 mm in water (10 mm rod)
Software version Software change
V 01.00.XX Original software
V 01.00.XX Original software
V 01.00.XX Original software
V 01.00.XX Original software
V 02.00.XX Extended to include SIL
functionality
V 01.00.XX Original software
V 01.00.XX Original software
Technical data
69