Probe Without Active Buildup Compensation - Endress+Hauser Liquicap M FTI51 Operating Instructions Manual

Liquicap M FTI51, FTI52
Endress+Hauser
3.7

Probe without active buildup compensation

1. Pressing screw
2. Insert seal
3. Cabel gland
4. Heatshrinking sleeve
5. Seal
6. Adapter disk
7. Seal
8. Plug M3
9. Split washer
10. Strand yellow/green (YE/GN) with ring terminal
11. Isolate yellow (YE) s
heatshringking sleeve
12. Snap ring
13. Nut M4
14. Split washer
15. Strand red (RD) with ring terminal and
heatshringking sleeve
16. Blade plug
17. Tube
18. Process connection
YE
GN/YE
trand with a
Installation
RD
24. Solder the red (RD) strand
with the central core of the
coaxial cable (probe)
23. Solder the yellow (YE) strand
with the screening of the
coaxial cable (ground)
22. Strand yellow/green (YE/GN)
with a ring terminal
21. Coaxial cable with central core
a nd screening
20. Strand black (BK)
(not required)
19. External screening
(not required)
L00-FMI5xxxx-03-05-xx-en-005
19