Temperature switch OTR31, OTR35
8.1
Cleaning
The device must be cleaned whenever necessary. Cleaning can also be done when the device is
installed (e.g. CIP Cleaning in Place / SIP Sterilization in Place). When cleaning the device,
care must be taken to ensure that it is not damaged.
NOTICE
Avoid damage to the device and the system
‣
Pay attention to the specific IP code when cleaning.
9
Repair
Repairs are not envisaged for the device.
9.1
Disposal
The device contains electronic components and must, therefore, be disposed of as electronic
waste in the event of disposal. When disposing, comply with national disposal regulations,
and separate and recycle the device components based on the materials.
Repair
27