Installation
8
3
Installation
3.1
Quick installation guide
1.
2.
a
1.) Screw in the device
2. a) Release the securing screw in the housing until the housing rotates easily.
2. b) Align the housing as required.
2. c) Tighten the securing screw (< 1 Nm) until the housing can no longer be turned.
3.2
Incoming acceptance and storage
3.2.1
Incoming acceptance
Check the packaging and the contents for damage.
Check the shipment, make sure nothing is missing and that the scope of supply matches your
order.
3.2.2
Storage
Pack the device so that it is protected against impact for storage and transportation. The
original packaging provides optimum protection.
The permitted storage temperature is –50°C to +85°C.
½
< 80 Nm (G )
¾
< 100 Nm (G )
< 180 Nm (G1)
½
< 500 Nm (G1 )
c
b
... 270°
Liquicap M FTI51, FTI52
L00-FMI5xxxx-17-06-xx-xx-001
Endress+Hauser