Probe With Active Buildup Compensation - Endress+Hauser Liquicap M FTI51 Operating Instructions Manual

Liquicap M FTI51, FTI52
Endress+Hauser
3.8

Probe with active buildup compensation

1. Pressing screw
2. Insert seal
3. Cabel gland
4. Heatshrinking sleeve
5. Seal
6. Adapter disk
7. Seal
8. Plug M3
9. Split washer
10. Strand yellow/green (YE/GN) with ring terminal
11. Strand yellow (YE) soldered with the guard strand,
insulated with a heatshrinking sleeve
12. Snap ring
13. Nut M4
14. Split washer
15. Strand red (RD) with ring terminal
insulated with a heatshringking sleeve
16. Blade plug
17. Guard strand (rd)
18. Tube
19. Process connection
RD
YE
25. Solder the
with the central core of the
coaxial cable (probe)
GN/YE
24. Solder the
with the guard
from the tube.
23. Strand yellow/green (YE/GN)
with a ring terminal
22. Coaxial cable with
a nd screening
21. Strand black (BK)
(not required)
20. External screening
(not required)
Installation
red (RD) strand
yellow (YE) strand
strand (RD)
central core
L00-FMI5xxxx-03-05-xx-en-008
21