Repair; Spare Parts; Return; Disposal - Endress+Hauser Liquiphant FTL33 Operating Instructions Manual

Liquiphant FTL33
10

Repair

Repair is not envisaged for the point level switch.
10.1

Spare parts

The website for the W@M Device Viewer (www.endress.com/deviceviewer): All spare parts
for the measuring device are listed here together with the order code and can be ordered here.
If available, users can also download the associated Installation Instructions.
10.2

Return

The requirements for safe device return can vary depending on the device type and national
legislation.
1. Refer to the website for more information:
http://www.endress.com/support/return-material
2. Return the device if repairs or a factory calibration are required, or if the wrong device
was ordered or delivered.
10.3

Disposal

If required by the Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), our products are marked with the depicted symbol in order to minimize the
disposal of WEEE as unsorted municipal waste. Such products may not be disposed of as
unsorted municipal waste and can be returned to Endress+Hauser for disposal at conditions
stipulated in our General Terms and Conditions or as individually agreed.
11

Accessories

For detailed information on accessories, see the Technical Documentation TI01148F.
Designation
Weld-in adapter
Seals, O-rings
Process adapter M24
Slotted nut
Endress+Hauser
Additional information

For detailed information on the weld-in adapters, see
TI00426F/00/EN and the supplementary documentation →  5.

For detailed information, see TI01148F/00/EN.
Repair
37