Identification; Device Designation; Scope Of Delivery; Trademarks - Endress+Hauser Liquicap M FTI51 Operating Instructions Manual

Identification

!
6
2 Identification
2.1

Device designation

2.1.1 Nameplate
Refer to the nameplate of the device for the following data:
Order number
(see ordering structure)
Made in Germany, D- 79689 Maulburg
Liquicap M
Order Code.:
Serial number
Ser.No.:
Electronic insert
FEI54
30VDC, 4A; 125VDC, 0,2A; 253VAC, 4A
Pmax.: 1,5W
£ Ta £ +70°C
-40°C
Ambient temperature
at housing
Information on the Liquicap M nameplate (example)
2.1.2 Product structure
Note!
The product structure is used to identify the alphanumeric order number (see nameplate:
Order Code).
The following options are available for identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
• Enter serial numbers from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All information about the measuring device is
displayed.
For an overview of the technical documentation provided, enter the serial number from the
nameplates in the W@M Device Viewer (www.endress.com/deviceviewer).
2.2

Scope of delivery

The scope of delivery consists of:
• The mounted device
• Optional accessories ( see Page 66 ff.)
Provided documentation:
• Operating Instructions
• Approval documentation; if not listed in the Operating Instructions.
2.3

Trademarks

® ®
KALREZ , VITON , TEFLON
Registered trademarks of E.I. Du Pont de Nemours & Co., Wilmington, USA
FTI51 - CAA2RCJ45A1A
123456789
U: 19-253VAC (50/60Hz), 19-55VDC
BVS 06 ATEX E 103 X
ATEX II 1/2G EEx ia IIC T6
Z 65.13.xxx
MWP:
SIL
Max. permissible pressure
Functional
safety
®
Liquicap M FTI51, FTI52
Active porbe length
L1 = 250 mm
IP65/66/
NEMA4X
L = 250 mm
XA 327 F- A
Dat.: 05/06
25bar
250002075 - A
Safety information
in tank
Endress+Hauser
Protection class
Approval No.
ATEX
WHG approval
(German Water
Resources Act)
Month and year
of production
L00-FTI5xxxx-18-00-00-en-001