Figure 12: Hyper Terminal - Advantech SSPBMg–C200–BRE Installation And Operating Manual

Figure 12: HyperTerminal RS-232 Communication – "help rs485", "rs485 ascii" and "rs485
N OTE: The rs485 parameter may be set to ascii, to binary, or to skywan.
- When this parameter is set to ascii, the RS-485 serial interface will work as a VT
serial interface (the same windows as for RS-232 serial interface will be available on
RS-485 interface).
- When the rs485 is set to binary, the RS-485 serial interface w
mode using the communication protocol described in APPENDIX A: RS-485
SERIAL COMMUNICATION PROTOCOL at page 37. In this case, the proposed
GUI (see Figure 13 at page 34) may be used to monitor and control the SSPB.
- When the rs485 is
packet mode, but using the SKYWAN communication protocol described in
APPENDIX B: RS-485 SKYWAN SERIAL COMMUNICATION PROTOCOL
at page 42.
binary" commands and responses
set to skywan, the RS-485 serial interface will work also in a
SSPBMg-C200-BRE
ill work in a packet
Page 33