Table 12: Computer Terminal Commands For Rs-232 Interface - Advantech SSPBM-K80-BTE Installation And Operating Manual

Advanced Microwave
Technologies
DVANTECH
NOTE: All shadowed lines in the following table are for commands not applicable for these
u nits

TABLE 12: COMPUTER TERMINAL COMMANDS FOR RS-232 INTERFACE

Command
h
<ENTER> ENTER key of keyboard
sw2
tmp
nam
Set gain for path A
gna
sw1
txm
txu
tme
dat
snb
mac
cur
alm
sst
psn
fpw
rpw
Description
Help function
Switch_2
Temperature
Set unit name
Switch_1
Tx Mute
Tx Unmute
Time(h:m:s)
Date(d:m:y)
Serial number
MAC address
Consumption
Alarms
Status
Unit position
Forward PW
Reflected PW
Response
Provides the list of commands that can be used to
modify the status of a unit.
Provides and refreshes the main menu display on the
computer monitor screen.
Command of switch 2 so as to set this unit on-line
the temperature of the L/Ku Up-Converter
will be displayed
Allows for a name to be attributed to the unit
Allows for the adjustment of the transmission gain of
the unit, in dB.
(Tx gain range: 46 to 71 dB)
Command of switch 1 so as to set this unit on-line
Transmission Mute command. The transmission path
of the unit is muted (no RF output power)
Transmission un-mute command. The transmission
path of the unit is enabled
Current time will be displayed (in format hour :
minutes : seconds)
Current date will be displayed (in format day :
month : year)
Displays the serial number of the unit
Displays the Monitor and Control address
Displays the DC current consumption of the unit
Displays the ALARMS of the unit (OK if no alarm)
Displays the system status
Displays the position of the unit in the system (A, S,
or B)
Displays the forward transmission output power (in
dBm)
Displays the reflected transmission power (in dBm)
SSPBM-K100-BTE
Page 31