Extended Result Codes; Restore User Defaults - Motorola iM1000 User Manual

iM1000 -Data Modem

Extended Result Codes

This command provides an extended result code selection.
Action
Query
Range
Parameter Values:
X
0,1
2
3
4

Restore User Defaults

This command causes the modem to reset all parameters and
S-registers to their user-defined default values. There are three
sets of user defaults. The parameter selects between which set
(or image) is being requested.
Action
Z
Query
Range
Parameter Values:
0
1
2
76
ATx<setting>
AT&v
The modem does not return the
result codes.
DIALTONE
The modem might return the
code if appropriate, but does not return the
result code.
The modem may return the
appropriate, but does not return the
result code.
The modem may return either the
result code, if appropriate.
DIALTONE
ATz<image>
Load user image 0
Load user image 1
Load user image 2
or
BUSY NO
result
NO DIALTONE
BUSY
result code if
BUSY
NO DIALTONE
or
BUSY NO