Motorola iM1000 User Manual page 53

iM1000 -Data Modem
(1) Select "Advanced".
(2) Type &K3 S7=60 at the end of the existing initialization
command.
c. Select "Connect Messages".
(1) Turn off Autobaud Detect and set Locked Baud to 19.2 K.
(Autobaud is only supported for serial speeds of 300, 1200,
2400, 4800, 9600, 19200, or 38400 baud.)
(2) Set "Auto".
3. Click the "Port Settings" icon and configure the settings as follows:
Baud Rate = 19200
Parity = None
Stop Bits = 1
Data Bits = 8
Duplex = Full
Software Flow Control (Xon/Xoff) = Off
4. Click the "Transfer Protocol" icon. For ZMODEM transfers,
configure the settings as follows:
Transmit Method = 4K-Window
Error Detection = 32-bit CRC
5. Save the current connection.
6. Click the "Fax Connection" icon.
a. Select "Install New Fax/Modem".
(1) Select "Generic Class 2 Fax, 2400 Data Modem".
(2) Select the appropriate port.
b. Configure other settings as follows:
Flow Control = Hardware
Fax Class = Class 2
Maximum Transmit Rate = 9600
Maximum Receive Rate = 9600
c. Type AT&K3 S7=60 to the existing initialization command.
d. Save your settings.
52