Select Mobile Ip Client - Motorola iM1000 User Manual

Select Mobile IP Client

This parameter activates/deactivates the Mobile Node
client in the DCE. The mobile host can operate in two
modes to access the iDEN packet data network.
Action
+WV300
Query
Range
Parameter Values:
0
1
Mobile IP Authentication Key
The iDEN network uses the MIP Authentication Key to
verify the authenticity of the DCE with the Home Agent. The
DCE and the Home Agent must have identical values for
this shared secret key for the DCE to satisfy the
authentication process.
NOTE: This command is applicable only when the Mobile
Node Client in the DCE is Activated.
Action
+WV301
Query
Range
Parameter Values:
The Authentication Key parameter is a text string of up to
32 characters. Unlike most text-string parameters, the
Authentication Key is a text representation of a
hexadecimal number. Therefore, only the characters 0-9
and A-F are acceptable. (The lower case characters, a-f,
are also acceptable).
Note that although this parameter represents a numeric
value, the parameter is actually a text string, so the
parameter must be enclosed in quotation marks.
AT+wv300=<MIP Mode>
AT+wv300?
AT+wv300=?
Deactivate Mobile Node in DCE
Activate Mobile Node in DCE
Ò
AT+wv301=< key
AT+wv301=?
APPENDIX
Ó
>
83