Motorola iM1000 User Manual page 15

iM1000 -Data Modem
4.
Figure 10. Select Network Component Type Window
4. Highlight "Protocol" then click "Add". The Select Network Protocol
window opens.
5.
6.
Figure 11. Select Network Protocol Window
5. Under Manufacturer, select "Microsoft".
6. Under Network Protocol, select "TCP/IP", then click "OK". The
TCP/IP Dial-Up Adapter appears in the list.
If the Dial-Up Adapter does not appear in the list, you do not have a
Dial-Up Adapter installed. You can install one. Use the procedure for
"Installing the Dial-Up Adapter" on page 15.
7. To close, click "OK".
8. If the Dial-Up Networking adapter is installed, continue with
"INSTALLATION INSTRUCTIONS" on page 16.
14