Installation Instructions; Connecting The Cable - Motorola iM1000 User Manual

iM1000 -Data Modem

INSTALLATION INSTRUCTIONS

This section provides information for connecting the data cable and
installing the software.
To instal the Wireless Data Services software on a computer
or hand-held device that does not have Windows installed,
or if you do not have the installation disks, proceed to
"Configuring the Modem for Packet Data— without the
Disk" on page 60.

Connecting the Cable

Your computer and your modem can be turned on or turned off when you
connect the cable.
To connect the data cable:
1. Connect the data cable to the accessory connector on your modem.
2. Attach the other end of the cable to a serial communication (COM)
port on your computer or hand-held computing device.
3. Position the antenna of the radio product at least 8 inches (20cms)
away from the body of any person when transmitting.
To remove the cable:
1. Disconnect the data cable from your modem.
2. Disconnect the data cable from your computer.
16
N O T E