Class 1 Result Code - +Fcerror; Fax Autoanswer - +Faa; Dte Autobaud For Fax Autoanswer - *Fr; Binary File Transfer - Motorola V.3600 User Manual

Fax Operation
Class 1 Result Code — +FCERROR
If the modem detects any carrier or tone that differs from that specified
in a +FRM or +FRH command, it sends the +FCERROR result code
and returns to command state, allowing the DTE to attempt a recovery.
The numeric form of this response is +F4.
Fax Autoanswer — +FAA=
The modem can be set up to automatically detect if a fax or data call is
being answered. The command +FAA=1 enables this function and
+FAA=0 disables it. This feature requires special support by the fax
software package.
Command
+FAA=0
+FAA=1
DTE Autobaud for Fax Autoanswer — *FR
Set the fax autoanswer feature to autobaud at 19.2 kbps or greater, if
desired.
Command
*FR
*FR1
*FR?

Binary File Transfer

Some Class 1 software packages may provide an option for transferring
files between computers with fax modems, using a Binary File Transfer
(BFT) standard. Although the received file is not a fax image,
transmitting the file is similar to sending a fax. Since the modem allows
T.30 error correction mode (with HDLC framing up to 9600 bps), fax
mode can also be used for BFT if supported by the Class 1 software
package. The Binary File Transfer is an option in the fax software
package, not a separate mode of operation.
9-10
Description
Disable fax autoanswer
Enable fax autoanswer
Description
Forced to > = 19,200 bps
Forced to = 19,200 bps
Display this option's current status
V.3600