Hardware Installation; Before You Start Installing; Installation Planning - Motorola iM1000 User Manual

HARDWARE INSTALLATION

Introduction
Hardware installation has to be carried out by experienced technicians
familiar with installing similar types of equipment.

Before You Start Installing

Ignition Sense Cable
The iM1000 will not operate without the Ignition
Accessories Cable installed or a power on plug connected.

Installation Planning

Planning is the key to fast, easy iM1000 installation. Before a hole is drilled
or a wire is run, inspect the vehicle and determine how and where you
intend to mount the antenna, iM1000, and accessories. Plan wire and cable
runs to provide maximum protection from pinching, crushing, and
overheating.
Recommended Tools For Installation
The following tools, screws, and washers are recommended for proper
installation of your iM1000.
• Portable Drill
• Hammer
• Center Punch
• Four screws M4
• Four self drilling screws M4
• Four flat washers M4
• Four spring washers M4
• Phillips #2 Screwdriver
HARDWARE INSTALLATION
N O T E
5